模擬示波器Tek 466
模擬存儲示波器，100MHz帶寬，雙蹤，衰減 5mV/div, 掃速 5-ns/div
此款示波器適合觀察非重復信號和緩慢移動的信號。
Features two modes of storage: Variable Persistence and Fast Transfer. Stored writing speed of 110 div/μsec. Sweep rate of 5 nsec/div with X10 magnifier. Four signal-output BNC connectors on the rear chamber changes to a type that improves shielding of the connected signal leads. The unit offers reduced scan mode in which the stored writing speed is 3000 div/μs.
技術指標
Bandwidth: 100 MHz
Number of Channels: 2 ch
Min. Vertical Sensitivity: 5 mV/div
Maximum Vertical Sensitivity: 5 V/div
Vertical(or Deflection Factor) Accuracy: 3 %
Input Coupling: AC,DC,GND
Input Impedance: 1 MOhm
Maximum Input Voltage: 250 V(dc+p)
Main time base - lowest: 50 ns/div
Main time base - highest: .5 s/div
B Sweep Time Base (low): 50 ns/div
B Sweep Time Base (high): 50 ms/div
Time base Magnification factor (X?): x10
Timebase accuracy: 2 %
Trigger Source: External,Internal
Trigger Sensitivity: 0.3 mV
Display Type Color: CRT
Display Size: 13 cm
Trace writing speed (Analog Oscilloscope): 3 div/s
測量特性
X/Y Mode
Comm Mode Rejection
Add Mode
Inverted Trace Shift
Chopped Mode
Cascaded
Trigger Jitter
Level Control
Trigger View
Trace Separation
Trigger Hold Off
Differential Time
Z Axis
Channel 1 Output
選件
Option 01 = Delete DM44 Temperature Probe
Option 04 = Emc Modification
Option 05 = TV Sync Separator (Provides triggering on TV field)
Option 07 = Ext Dc Operation (not available with DM44)
Option 10 = Third Channel Trigger View (Cannot be ordered with Option 05)
Option DM44 = Built-in DMM
